Now always complete your College Practical File on time and get the best grades.
A clamping circuit is used to place either the positive or negative peak of a signal at a desired level. The DC component is simply added or subtracted to/from the input signal. The clamper is also referred to as an IC
When P and N semiconductors are joined to make the PN junction semiconductor diode, the electrons near the PN junction jump from N to P and holes near the junction jump from P to N. This phenomenon creates a depletion
A rectifier is an electrical device composed of one or more diodes that converts alternating current (AC) to direct current (DC). The process of AC to DC conversion is called rectification. There are two types of single wave rectifiers half
Clippers or (clipping circuits) are used to prevent the output of a circuit from exceeding a predetermined voltage level without distorting and protecting the circuit from high voltage spikes. The types of clipping circuits (or clippers) are negative clipping circuit and
Zener diodes are a special type of semiconductor diode– devices that allow current to flow in one direction only –that also allow current to flow in the opposite direction, but only when exposed to enough voltage. We will learn about
Single-phase transformers accept single-phase AC power and output single-phase AC power, typically at a higher or lower voltage level. Energy is transferred from one circuit to one or more circuits via electromagnetic induction. Open-circuit voltage is the difference of electrical potential
In two wattmeter method, we have two types of connections: Star connection of loads Delta connection of loads. In star connection of load, the reading of wattmeter one is product phase current and voltage difference (V2-V3) and the reading of wattmeter
A single-phase transformer is a type of power transformer that utilizes single-phase alternating current, meaning the transformer relies on a voltage cycle that operates in a unified time phase. They are often used to step-down long distance and localized transmission
Thévenin’s Theorem states that it is possible to simplify any linear circuit, no matter how complex, to an equivalent circuit with just a single voltage source and series resistance connected to a load. In this electrical practical, we will verify
Superposition Theorem states that a circuit can be analysed with only one source of power at a time, the corresponding component voltages and currents algebraically added to find out what they’ll do with all power sources in effect. To negate all